RIP配置

网络 eNsp RIP
发布时间 :
字数:2.4k 阅读 : 评论:
  1. 一、实验目的
  2. 二、配置
    1. １、拓扑
    2. ２、左边PC
    3. ３、右边PC
    4. ４、S４
    5. ５、S５
    6. ６、S６
    7. ７、S１
    8. ８、S２
    9. ９、S３
    10. １０、Ｒ１
    11. １１、Ｒ２
    12. １２、Ｒ３
  3. 三、测试

一、实验目的

配置RIP
说明：
1.交换机和三层交换机配置RIP
2.左边静态地址、右边DHCP
3.左边除了DHCP，昨天的都配上

二、配置

１、拓扑


IP规划：

VLAN10:192.168.10.253(S1) 192.168.10.254(S2) 192.168.10.1(虚拟IP)
VLAN20:192.168.20.253(S1) 192.168.10.254(S2) 192.168.20.1(虚拟IP)
VLAN30:192.168.30.253(S1) 192.168.10.254(S2) 192.168.30.1(虚拟IP)
VLAN40:192.168.40.253(S1) 192.168.10.254(S2) 192.168.40.1(虚拟IP)

VLAN50:192.168.50.1(S3)
VLAN60:192.168.60.1(S3) 

VLAN70:192.168.70.253(S1)-R1:192.168.70.50

VLAN80:192.168.80.254(S2)-R1:192.168.80.50

VLAN90:192.168.90.1(S3)-R3:192.168.90.50

R1:192.168.100.50-R2:192.168.100.51

R2:192.168.110.51-R3:192.168.110.50

２、左边PC

静态IP，手动配置

３、右边PC

DHCP，动态获取IP地址

４、S４

只需要配置接口、vlan即可　S５也是

命名

<Huawei>sys 
Enter system view, return user view with Ctrl+Z.
[Huawei]sys LWS4

删除提示信息

[LWS4]un in en
Info: Information center is disabled.

创建VLAN

[LWS4]vlan 10
[LWS4-vlan10]vlan 20
[LWS4-vlan20]quit

接口配置

[LWS4]int e0/0/3
[LWS4-Ethernet0/0/3]un sh
Info: Interface Ethernet0/0/3 is not shutdown.
[LWS4-Ethernet0/0/3]port link-t a
[LWS4-Ethernet0/0/3]port de vlan 10
[LWS4-Ethernet0/0/3]int e0/0/4
[LWS4-Ethernet0/0/4]un sh
Info: Interface Ethernet0/0/4 is not shutdown.
[LWS4-Ethernet0/0/4]port link-t a
[LWS4-Ethernet0/0/4]port de vlan 10
[LWS4-Ethernet0/0/4]int e0/0/1
[LWS4-Ethernet0/0/1]un sh
Info: Interface Ethernet0/0/1 is not shutdown.
[LWS4-Ethernet0/0/1]port link-t t
[LWS4-Ethernet0/0/1]port t allow vlan all
[LWS4-Ethernet0/0/1]int e0/0/2
[LWS4-Ethernet0/0/2]un sh
Info: Interface Ethernet0/0/2 is not shutdown.
[LWS4-Ethernet0/0/2]port link-t t
[LWS4-Ethernet0/0/2]port t allow vlan all
[LWS4-Ethernet0/0/2]quit
[LWS4]stp mode stp
Info: This operation may take a few seconds. Please wait for a moment...done.

保存配置

[LWS4]quit
<LWS4>save
The current configuration will be written to the device.
Are you sure to continue?[Y/N]y
Info: Please input the file name ( *.cfg, *.zip ) [vrpcfg.zip]:
Now saving the current configuration to the slot 0.
Save the configuration successfully.

５、S５

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]sys LWS5
[LWS5]un in en
Info: Information center is disabled.
[LWS5]vlan 30
[LWS5-vlan30]vlan 40
[LWS5-vlan40]quit
[LWS5]int e0/0/3
[LWS5-Ethernet0/0/3]un sh
Info: Interface Ethernet0/0/3 is not shutdown.
[LWS5-Ethernet0/0/3]port link-t a
[LWS5-Ethernet0/0/3]port de vlan 30
[LWS5-Ethernet0/0/3]int e0/0/4
[LWS5-Ethernet0/0/4]un sh
Info: Interface Ethernet0/0/4 is not shutdown.
[LWS5-Ethernet0/0/4]port link-t a
[LWS5-Ethernet0/0/4]port de vlan 40
[LWS5-Ethernet0/0/4]int e0/0/1
[LWS5-Ethernet0/0/1]un sh
Info: Interface Ethernet0/0/1 is not shutdown.
[LWS5-Ethernet0/0/1]port link-t t
[LWS5-Ethernet0/0/1]port t allow vlan all
[LWS5-Ethernet0/0/1]int e0/0/2
[LWS5-Ethernet0/0/2]un sh
Info: Interface Ethernet0/0/2 is not shutdown.
[LWS5-Ethernet0/0/2]port link-t t
[LWS5-Ethernet0/0/2]port t allow vlan all
[LWS5-Ethernet0/0/2]quit
[LWS5]stp mode stp
Info: This operation may take a few seconds. Please wait for a moment...done.

６、S６

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWS6
[LWS6]vlan 50
[LWS6-vlan50]vlan 60
[LWS6-vlan60]quit
[LWS6]int e0/0/2
[LWS6-Ethernet0/0/2]un sh
Info: Interface Ethernet0/0/2 is not shutdown.
[LWS6-Ethernet0/0/2]port link-t a
[LWS6-Ethernet0/0/2]port de vlan 50
[LWS6-Ethernet0/0/2]int e0/0/3
[LWS6-Ethernet0/0/3]un sh
Info: Interface Ethernet0/0/3 is not shutdown.
[LWS6-Ethernet0/0/3]port link-t a
[LWS6-Ethernet0/0/3]port de vlan 60
[LWS6-Ethernet0/0/3]int e0/0/1
[LWS6-Ethernet0/0/1]un sh
Info: Interface Ethernet0/0/1 is not shutdown.
[LWS6-Ethernet0/0/1]port link-t t
[LWS6-Ethernet0/0/1]port t allow vlan all
[LWS6-Ethernet0/0/1]quit

７、S１

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWS1

[LWS1]vlan 10
[LWS1-vlan10]vlan 20
[LWS1-vlan20]vlan 30
[LWS1-vlan30]vlan 40
[LWS1-vlan40]quit


[LWS1]vlan 70
[LWS1-vlan70]quit
[LWS1]int g0/0/1
[LWS1-GigabitEthernet0/0/1]un sh
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[LWS1-GigabitEthernet0/0/1]port link-t a
[LWS1-GigabitEthernet0/0/1]port de vlan 70
[LWS1-GigabitEthernet0/0/1]int vlan 70
[LWS1-Vlanif70]ip add 192.168.70.253 24
[LWS1-Vlanif70]quit


[LWS1]int g0/0/2
[LWS1-GigabitEthernet0/0/2]un sh
Info: Interface GigabitEthernet0/0/2 is not shutdown.
[LWS1-GigabitEthernet0/0/2]port link-t t
[LWS1-GigabitEthernet0/0/2]port t allow vlan all
[LWS1-GigabitEthernet0/0/2]int g0/0/3
[LWS1-GigabitEthernet0/0/3]un sh
Info: Interface GigabitEthernet0/0/3 is not shutdown.
[LWS1-GigabitEthernet0/0/3]port link-t t
[LWS1-GigabitEthernet0/0/3]port t allow vlan all
[LWS1-GigabitEthernet0/0/3]int g0/0/4
[LWS1-GigabitEthernet0/0/4]un sh
Info: Interface GigabitEthernet0/0/4 is not shutdown.
[LWS1-GigabitEthernet0/0/4]port link-t t
[LWS1-GigabitEthernet0/0/4]port t allow vlan all
[LWS1-GigabitEthernet0/0/4]quit

stp

[LWS1]stp mode stp
Info: This operation may take a few seconds. Please wait for a moment...done.
[LWS1]stp prio 0

VLAN的IP及VRRP

[LWS1]int vlan 10
[LWS1-Vlanif10]ip add 192.168.10.253 255.255.255.0
[LWS1-Vlanif10]vrrp vrid 10 virtual-ip 192.168.10.1
[LWS1-Vlanif10]vrrp vrid 10 prio 120
[LWS1-Vlanif10]int vlan 20
[LWS1-Vlanif20]ip add 192.168.20.253 255.255.255.0
[LWS1-Vlanif20]vrrp vrid 20 vi 192.168.20.1
[LWS1-Vlanif20]vrrp vrid 20 prio 120
[LWS1-Vlanif20]int vlan 30
[LWS1-Vlanif30]ip add 192.168.30.253 255.255.255.0
[LWS1-Vlanif30]vrrp vrid 30 vi 192.168.30.1
[LWS1-Vlanif30]int vlan 40
[LWS1-Vlanif40]ip add 192.168.40.253 255.255.255.0
[LWS1-Vlanif40]vrrp vrid 40 vi 192.168.40.1
[LWS1-Vlanif40]quit

S1是VLAN10和VLAN20主R，设置接口监听，与路由器连接的接口有问题，则优先级降30，让S2为主R

[LWS1]int vlan 10
[LWS1-Vlanif10]vrrp vrid 10 track int g0/0/1 reduce 30
[LWS1-Vlanif10]int vlan 20
[LWS1-Vlanif20]vrrp vrid 20 track int g0/0/1 reduce 30
[LWS1-Vlanif20]quit

RIP,可以先用dis ip int brief查看所有IP，然后添加

[LWS1]rip 1
[LWS1-rip-1]network 192.168.10.0
[LWS1-rip-1]network 192.168.20.0
[LWS1-rip-1]network 192.168.30.0
[LWS1-rip-1]network 192.168.40.0
[LWS1-rip-1]network 192.168.70.0
[LWS1-rip-1]quit
[LWS1]quit

８、S２

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWS2
[LWS2]int g0/0/2
[LWS2-GigabitEthernet0/0/2]un sh
Info: Interface GigabitEthernet0/0/2 is not shutdown.
[LWS2-GigabitEthernet0/0/2]port link-t t
[LWS2-GigabitEthernet0/0/2]port t allow vlan all
[LWS2-GigabitEthernet0/0/2]int g0/0/3
[LWS2-GigabitEthernet0/0/3]un sh
Info: Interface GigabitEthernet0/0/3 is not shutdown.
[LWS2-GigabitEthernet0/0/3]port link-t t
[LWS2-GigabitEthernet0/0/3]port t allow vlan all
[LWS2-GigabitEthernet0/0/3]int g0/0/4
[LWS2-GigabitEthernet0/0/4]un sh
Info: Interface GigabitEthernet0/0/4 is not shutdown.
[LWS2-GigabitEthernet0/0/4]port link-t t
[LWS2-GigabitEthernet0/0/4]port t allow vlan all
[LWS2-GigabitEthernet0/0/4]quit

[LWS2]vlan 10
[LWS2-vlan10]vlan 20
[LWS2-vlan20]vlan 30
[LWS2-vlan30]vlan 40
[LWS2-vlan40]quit

[LWS2]vlan 80
[LWS2-vlan80]quit
[LWS2]int g0/0/1
[LWS2-GigabitEthernet0/0/1]un sh
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[LWS2-GigabitEthernet0/0/1]port link-t a
[LWS2-GigabitEthernet0/0/1]port de vlan 80
[LWS2-GigabitEthernet0/0/1]quit
[LWS2]int vlan 80
[LWS2-Vlanif80]ip add 192.168.80.254 24
[LWS2-Vlanif80]quit

[LWS2]int vlan 10
[LWS2-Vlanif10]ip add 192.168.10.254 255.255.255.0
[LWS2-Vlanif10]vrrp vrid 10 vi 192.168.10.1
[LWS2-Vlanif10]int vlan 20
[LWS2-Vlanif20]ip add 192.168.20.254 255.255.255.0
[LWS2-Vlanif20]vrrp vrid 20 vi 192.168.20.1
[LWS2-Vlanif20]int vlan 30
[LWS2-Vlanif30]ip add 192.168.30.254 255.255.255.0
[LWS2-Vlanif30]vrrp vrid 30 vi 192.168.30.1
[LWS2-Vlanif30]vrrp vrid 30 prio 120
[LWS2-Vlanif30]int vlan 40
[LWS2-Vlanif40]ip add 192.168.40.254 24
[LWS2-Vlanif40]vrrp vrid 40 vi 192.168.40.1
[LWS2-Vlanif40]vrrp vrid 40 prio 120
[LWS2-Vlanif40]quit
[LWS2]stp mode stp
Info: This operation may take a few seconds. Please wait for a moment...done.
[LWS2]stp prio 4096


[LWS2]rip 1
[LWS2-rip-1]net 192.168.10.0
[LWS2-rip-1]net 192.168.20.0
[LWS2-rip-1]net 192.168.30.0
[LWS2-rip-1]net 192.168.40.0
[LWS2-rip-1]net 192.168.80.0
[LWS2-rip-1]quit

９、S３

<Huawei>sys 
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWS3
[LWS3]vlan 50
[LWS3-vlan50]vlan 60
[LWS3-vlan60]vlan 90
[LWS3-vlan90]quit
[LWS3]int g0/0/2
[LWS3-GigabitEthernet0/0/2]un sh
Info: Interface GigabitEthernet0/0/2 is not shutdown.
[LWS3-GigabitEthernet0/0/2]port link-t t
[LWS3-GigabitEthernet0/0/2]port t allow vlan all
[LWS3-GigabitEthernet0/0/2]int g0/0/1
[LWS3-GigabitEthernet0/0/1]un sh
Info: Interface GigabitEthernet0/0/1 is not shutdown.
[LWS3-GigabitEthernet0/0/1]port link-t a
[LWS3-GigabitEthernet0/0/1]port de vlan 90
[LWS3-GigabitEthernet0/0/1]quit
[LWS3]int vlan 50
[LWS3-Vlanif50]ip add 192.168.50.1 24
[LWS3-Vlanif50]int vlan 60
[LWS3-Vlanif60]ip add 192.168.60.1 24
[LWS3-Vlanif60]int vlan 90
[LWS3-Vlanif90]ip add 192.168.90.1 24
[LWS3-Vlanif90]quit

[LWS3]dhcp en
[LWS3]ip pool vlan50
Info:It's successful to create an IP address pool.
[LWS3-ip-pool-vlan50]gateway-list 192.168.50.1
[LWS3-ip-pool-vlan50]net 192.168.50.0 mask 255.255.255.0
[LWS3-ip-pool-vlan50]quit
[LWS3]ip pool vlan60
Info:It's successful to create an IP address pool.
[LWS3-ip-pool-vlan60]gateway-list 192.168.60.1
[LWS3-ip-pool-vlan60]net 192.168.60.0 mask 255.255.255.0
[LWS3-ip-pool-vlan60]quit
[LWS3]int vlan 10
[LWS3-VLANIF10]dhcp select global

[LWS3]rip 1
[LWS3-rip-1]net 192.168.50.0
[LWS3-rip-1]net 192.168.60.0
[LWS3-rip-1]net 192.168.90.0
[LWS3-rip-1]quit

１０、Ｒ１

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWR1
[LWR1]int e0/0/0
[LWR1-Ethernet0/0/0]ip add 192.168.70.50 24
[LWR1-Ethernet0/0/0]int e0/0/1
[LWR1-Ethernet0/0/1]ip add 192.168.80.50 24
[LWR1-Ethernet0/0/1]int g0/0/0
[LWR1-GigabitEthernet0/0/0]ip add 192.168.100.50 24
[LWR1-GigabitEthernet0/0/0]quit

[LWR1]rip 1
[LWR1-rip-1]net 192.168.70.0
[LWR1-rip-1]net 192.168.80.0
[LWR1-rip-1]net 192.168.100.0
[LWR1-rip-1]quit

１１、Ｒ２

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]int e0/0/0
[Huawei-Ethernet0/0/0]ip add 192.168.100.51 24
[Huawei-Ethernet0/0/0]int e0/0/1
[Huawei-Ethernet0/0/1]ip add 192.168.110.51 24
[Huawei-Ethernet0/0/1]quit




[Huawei]rip 1
[Huawei-rip-1]net 192.168.100.0
[Huawei-rip-1]net 192.168.110.0
[Huawei-rip-1]quit

１２、Ｒ３

<Huawei>sys
Enter system view, return user view with Ctrl+Z.
[Huawei]un in en
Info: Information center is disabled.
[Huawei]sys LWR3
[LWR3]int e0/0/0
[LWR3-Ethernet0/0/0]ip add 192.168.110.50 24
[LWR3-Ethernet0/0/0]int e0/0/1
[LWR3-Ethernet0/0/1]ip add 192.168.90.50 24
[LWR3-Ethernet0/0/1]quit

[LWR3]rip 1
[LWR3-rip-1]net 192.168.90.0
[LWR3-rip-1]net 192.168.110.0
[LWR3-rip-1]quit

三、测试

PC互ping

S4或S5

dis stp brief

S1或S2

dis vrrp brief

接着shutdownS1的上层端口

Master变为backup

文章汇总：

HCL的安装和使用

go->

ping通及Telnet

go->

VLAN间通信

go->

DHCP配置

go->

DHCP中继

go->

STP及VRRP配置

go->

RIP配置

go->

OSPF配置

go->

ACL+NAT配置

go->

使用eNSP搭建企业网络

go->

赏

文章标题:RIP配置

文章字数:2.4k

本文作者:Luwang

发布时间:2019-09-19, 16:13:56

最后更新:2024-01-11, 16:41:20

原始链接:https://wallleap.cn/2019/09/19/web-HCL6/

版权声明: "署名-非商用-相同方式共享 4.0" 转载请保留原文链接及作者。

×

喜欢就点赞,疼爱就打赏